Below is our standard process of painting your car. Old paint media blasted off to bare metal. Do any rust repair and welding necessary. Fit and align panels, doors, hood, etc. Do bodywork and molding from panel to panel. Spray 3 coats Squeeg's Epoxy primer. Guide-Coat and do a 120 grit blocksand. Do any additional fixing at this time, re-prime areas. Spray everything with 4 coats PPG Urethane primer. Blocksand primer with 220, 400 & 600 grits. Clean, mask and spray car with DP Epoxy sealer. Clean and prep interior and trunk with Zolatone. Sand DP Epoxy sealer on car with 800 grit. Clean and re-mask car. Spray basecoat color on car, custom paint, etc. Spray 4 final coats urethane clear on car. Bake finish and air dry. Colorsand clear with 600, 800, 1000, 1200, 1500 & 2000 grits. Buff each panel multiple times. Polish each panel multiple times. Clean and re-assemble car, detail.